Pre fabrication shot blasting
The VSB-serie is designed for the automatic surface preparation of beams, profiles, flat bars, tubes and plates. The shot blaster is provided with heavy-duty turbines and has a brush and blow-off unit. With the Brush and Blow off unit being connected with the shot blaster allows the unit to remove the shot immediately after blasting. Transport rolls are integrated into the shot blaster and the brush unit to transport the material through the machine.
To fully automate the pre-fabrication of steel structures the shot blaster can be combined with a sawing and/or drilling system to provide an extremely high-speed production system controlled by only one operator.
Specifications
| VSB1500-4 |
VSB1500-6 | VSB2500-6 |
VSB3300-8 | VSB4500-10 | |
| Entrance dimension | 1.600 x 600 mm |
1.600 x 600 mm | 2.600 x 600 mm |
3.400 x 200 mm 2.500 x 600 mm |
4.600 x 300 mm |
| Turbines |
4 |
6 | 6 |
8 | 10 |
| Power per turbine |
15 kW |
15 kW | 15 kW |
15 kW | 15 kW |
| Turbine diameter |
380 mm |
380 mm | 380 mm |
380 mm | 380 mm |
| Capacity line load |
750 kg/m | 750 kg/m | 750 kg/m | 750 kg/m | - |
| Capacity spreaded load | 1.500 kg/m |
1.500 kg/m | 1.500 kg/m |
2.500 kg/m |
2.500 kg/m |
| Passage speed range |
0,7 - 10 m/min. | 0,7 - 10 m/min. | 0,7 - 10 m/min. |
0,7 - 10 m/min. | 0,7 - 10 m/min. |
| Blasting speed | 1,2 - 1,8 m/min. | 1,4 - 2,4 m/min. | 1,0 - 1,6 m/min. | 1,0 - 1,6 m/min. | 1,3 - 1,9 m/min. |
| Filter cartridges |
8 pcs. |
8 pcs. | 10 pcs. |
16 pcs. | 16 pcs. |
| Capacity abrasive container |
800 litres |
1.000 litres | 1.000 litres |
1.600 litres | 2.000 litres |