Punching and shearing V550-10
The V550-10 punching/shearing line is the most comprehensive punching and shearing line from the V550-series. The vertical punching machine of the V550-10 is fitted with 10 punches and 20 dies. For cutting flats, the punching and shearing line is fitted with a mitre-cutting shear. The machine is also equipped with a hydraulic numbering unit, which imprint 4 characters at the same time. As an optional extra the system can also process angles.
Operating range |
|
| Flat bar | 2” x ¼” – 20” x 1” |
| Angle |
2” x 2” x ¼” – 8” x 8” x 5/8” |
VP 10 Punching machine |
|
| Capacity |
110 Tons |
| Punch Ø / material thickness |
2-1/4” / 9/16” or 1-1/4” / 1” |
| Number of punches | 10 |
| Number of dies |
20 |
VPS 2200 Flat bar shear |
|
| Capacity | 242 Tons |
| Width / material thickness |
20” / 1” |
| Mitre shearing | +/- 45° |
VN 4/36 Marking system |
|
| Characters | 4 x 36 |
| Characters height x imprint | 3/8” x 1/24” |
Options |
|
VHS 2400 Angle bar shear |
|
| Capacity |
264 Tons |
| Width / material thickness |
8” x 8” / 5/8” |
VPH 600 Horizontal punching machine |
|
| Capacity |
66 Tons |
| Punch Ø / material thickness |
1-1/4” / 5/8” |
| Number of punches |
1 |
VD40 Vertical drilling unit |
|
| Drill diameter |
5/16” – 1-9/16” |
| Carbide tipped drills |
suitable |
| Thread tapping |
3/8” – 1” |
| Feed and positioning |
servo-motors |
| Layout marking |
included |
| Spindle rpm (servo) |
stepless 100 - 2.500 rpm |
| Lubrication |
internal air/oil |
| Holder |
SK40 |
| Automatic tool changer |
VTC 5/40, 2 x 5 positions |