V550-4 Punching and shearing line
The V550-4 Punching and shearing line is a modular design for the processing of flat bar and angle. The basic model of the V550-1 punching and shearing line consists of an infeed system, a hydraulic 4 gag punch and a flat bar shear.
In our series of the V550-4 punching and shearing line the V550-4 is the basic system. This robust punching and shearing system is supplied with a 100 ton punch assembly with a single tool suitable for processing flat bar. The V550-4 can also produce layout marks for subsequent fabrication positions. The V550-4 punching and shearing line is supplied with a 220 ton hydraulic flat bar shear. The V550-4 punching and shearing line can be equipped with a single disc marking system for piece part identification on flat bar and angle.
Operating range |
|
| Flat bar | 2” x ¼” – 20” x 1” |
| Angle |
2” x 2” x ¼” – 8” x 8” x 5/8” |
VPO 1000 Punch |
|
| Capacity |
110 Tons |
| Punch Ø / material thickness |
2-1/4” / 9/16” or 1-1/4” / 1” |
| Number of punches | 4 |
VPS 2200 Flat bar shear |
|
| Capacity | 242 Tons |
| Width / material thickness |
20” / 1” |
| Mitre shearing | +/- 45° |
VNI 1/36 marking system |
|
| Characters | 1 x 36 |
| Characters height x imprint | 3/8” x 1/24” |
Options |
|
VHS 2400 Angle steel shear |
|
| Capacity |
264 Tons |
| Width / material thickness |
8” x 8” / 5/8”< |
VPH 600 Horizontal punching machine |
|
| Capacity |
66 Tons |
| Punch Ø / material thickness |
1-1/4” / 5/8” br> |
| Number of punches |
1 |
VD40 Vertical drilling unit |
|
| Drill diameter |
5/16” – 1-9/16” |
| Carbide tipped drills |
suitable |
| Thread tapping |
3/8” – 1” |
| Feed and positioning |
servo-motors |
| Layout marking |
included |
| Spindle rpm (servo) |
stepless 100 - 2.500 rpm |
| Lubrication |
internal air/oil |
| Holder |
SK40 |
| Automatic tool changer |
VTC 5/40, 2 x 5 positions |