Voortman

Introduction

Pre fabrication painting range The advantages of the Voortman range of automatic painting machines are the economic use of paint and reduce of man-hours. Sensors recognize the contours and dimensions of the profiles to be painted. Due to this information the adjustable oscillating spray heads are positioned very accurate, which results in an equal applied coat. The non-adhesive surface of the plain inner walls of the chamber makes cleaning very easy. The cabin floor is protected with a single-use foil. After cleaning the cabin walls the paint-dust residues lying on the floor can be easily pulled via the floor foil sideways out of the machine, replacing the used foil with fresh one in the same movement.

Specs

		VP1500-4	VP2500-4	VP3300-8
Entrance dimension	mm feet	1.600 x 600 5-¼ x 2	2.600 x 600 8-½x2	3.400 x 600 11-⅛ x 2
Plates max. width	mm inch	1.500 59	2.500 98-½	3.300 130
Profiles max. width	mm inch	1.300 51	1.800 71	2.400 95
Profiles max. height	mm inch	500 20	500 20	500 20
Painting speed	m/min. f/min.	0,5 - 2,8 1-⅝ - 9-³⁄₁₆	0,5 - 2,5 1-⅝ - 8-³⁄₁₆	0,5 - 3,6 1-⅝ - 11-¹³⁄₁₆
Spray guns	pcs.	4	4	8

Advantages

Advantages of the pre fabrication painting systems. Click on the advantages to read more.

Maintainability painting machine

All sensors and protective switches are integrated in a diagnostic software to guide the operator to locate the error

Paint savings

Saving of paint compared with a manual sprayer 25%

Paint application

For each material type an application program is available to reduce overlapping and paint use to a minimum.

Options

These pre fabrication painting machines can be provided with several options.

Pre-heater

Saving of gas consumption compared with an old type of heater with more than 40%. You also save energy by using the exhaust warm air of the pre-heater in the after dryer.

Drying tunnel

The paint drying tunnel is placed directly behind the paintcabin in a continuous line. A traveling grate, integrated in the drying tunnel takes over the freshly coated material from the painting cabin. The unit is operated with warm circulating air and is to considerably enforce the drying process of the freshly coated material. Heating and ventilation aggregates are positioned on side of the transport section.

Software

In VACAM, production data can be in- and exported in the format of DStV(+).

Besides the comfort of a Windows based environment VACAM has the advantage that authorized persons at all times can retrieve real-time information about the production progress. This can be done through an on-screen in-motion presentation of the system.

For a more detailed report the Production Data Exporter module can be used. This module allows real-time fabrication information sharing. In any case all operations and motions performed on the system are stored for sharing with any ERP, MRP, MIS and BIM software systems.