Punching and shearing V550-1
Options
The V550-1 punching and shearing system can be provided with several options.
 | Angle shear VHS 2400For cutting angles the machines can be provided with angle steel shear. The angle steel shear will be assembled on a base frame together with the flat steel shear. After selecting a product made from angle steel, the angle steel shear will be positioned in the production line. This means there will be no time lost during the change from flat to angle steel. For a cleaner cut the shear is provided with hydraulic clamping unit. The cutting capacity is 2400 KN. |
| | |
 | Cross transportsFor effective material handling, the machine can be provided with a drag-chain cross transports at the infeed side. Timesaving's will be made because the cross transport can be used as a buffer zone for basic material lengths which will be transported on the infeed conveyor automatically. |
| | |
| | Outfeed roller conveyorThe machine can be equipped with an outfeed roller conveyor. The first section of this roller conveyor is manually liftable, so following shearing short products are dropped in a bin placed under this piece of conveyor. Long products and off cuts are transported along the outfeed roller conveyor. |
| | |
 | Automatic outfeed systemFor automatic outfeed of the products, an automatic outfeed system is available. This outfeed system consists of a roller conveyor and cross supports. The first section of the roller conveyor is pneumatic liftable. After sawing, small products fall directly in a bin. |
| | |
 | Outfeed conveyor beltBy means of the outfeed conveyor belt, after cutting the products are directly transported onto the outfeed table on the front side of the belt. |