Punching and shearing V550-1
The V550 Punching and shearing system is a modular system for processing flats and angles. The basic model of the V550-1 punching and shearing system consists of an infeed system, a hydraulic single punching machine and a hydraulic flat steel shear.
In our series of the V550 punching and shearing systems, the V550-1 is the basic system. This steel construction machine is provided with a 100-ton vertical punching machine with a single punch, suitable for punching flat steel, centre point marking is also possible. The V550-1 punching and shearing system is provided with a hydraulic shear for cutting flat steel. The steel shear capacity is 220 ton. This steel punching and shearing system is, just like the V550-4, equipped with a single disc numbering unit for the numbering of flat steel and angle steel.
Operating range |
|
| Flat steel | 50 x 5 - 500 x 25 mm |
| Angle steel |
50 x 50 x 5 - 200 x 200 x 16 mm |
VPE 1000 Punching machine |
|
| Capacity |
1.000 KN |
| Punch Ø / material thickness |
31mm / 25mm |
| Number of punches | 1 |
VPS 2200 Flat steel shear |
|
| Capacity | 2.200 kN |
| Width / material thickness |
500 mm / 25 mm |
| Mitre shearing | +/- 45° |
VNI 1/36 Numbering unit |
|
| Characters | 1 x 36 |
| Characters height x imprint | 10 x 1 mm |
Options |
|
VHS 2400 Angle steel shear |
|
| Capacity |
2.400 kN |
| Width / material thickness |
200 x 200 mm / 16 mm |

