Punching and shearing V550-10
The V550-10 punching/shearing line is the most comprehensive punching and shearing line from the V550-series. The vertical punching machine of the V550-10 is fitted with 10 punches and 20 dies. For cutting flats, the punching and shearing line is fitted with a mitre-cutting shear. The machine is also equipped with a hydraulic numbering unit, which imprint 4 characters at the same time. As an optional extra the system can also process angles.
Operating range |
|
| Flat steel | 50 x 5 - 500 x 25 mm |
| Angle steel |
50 x 50 x 5 - 200 x 200 x 16 mm |
VP 10 Punching machine |
|
| Capacity |
1.000 KN |
| Punch Ø / material thickness |
57 mm / 15mm / 31 mm / 25 mm |
| Number of punches | 10 |
| Number of dies |
20 |
VPS 2200 Flat steel shear |
|
| Capacity | 2.200 kN |
| Width / material thickness |
500 mm / 25 mm |
| Mitre shearing | +/- 45° |
VN 4/36 Numbering unit |
|
| Characters | 4 x 36 |
| Characters height x imprint | 10 x 1 mm |
Options |
|
VHS 2400 Angle steel shear |
|
| Capacity |
2.400 kN |
| Width / material thickness |
200 x 200 mm / 16 mm |
VPH 600 Horizontal punching machine |
|
| Capacity |
600 kN |
| Punch Ø / material thickness |
31 mm / 16 mm |
| Number of punches |
1 |
VD40 Vertical drilling unit |
|
| Drill diameter |
8 - 40 mm |
| Carbide tipped drills |
suitable |
| Thread tapping |
M8 - M24 |
| Feed and positioning |
servo-motors |
| Centre point marking |
included |
| Spindle rpm (servo) |
stepless 100 - 2.500 rpm |
| Lubrication |
internal air/oil |
| Holder |
SK40 |
| Automatic tool changer |
VTC 5/40, 2 x 5 positions |