Machine specifications

General    
Flat steel mm
inch
50 x 5 - 500 x 25
2 x 13/64 - 19-5/8 x 1
Flat steel (45° cut) mm
inch
315 x 25
12-1/2 x 1 
Angle steel mm
inch
50 x 5 - 200 x 16
2 x 13/64 - 8 x 5/8
Positioning weight kg
lbs
6 / 9 / 12 / 15 (depending on configuration)
20 / 30 / 40 / 50
Maximum length of raw material m
ft
35
115
Maximum length of raw material (automatic infeed) mm
inch
1600
63
Minimum waste length mm
inch
170
6-1/2
Working height mm
inch
940
37
Positioning   servo motor
Positioning speed (empty) - truck m/min
f/min
75
245
Positioning speed (loaded - max. 750 kg) m/min
f/min
15
50
Maximum acceleration (empty) - truck m/s2
ft/s2
2,5
8,2
Hydraulic unit kW
Hp
30
40
Hydraulic pressure bar
psi
275
3,990
Hydraulic flow L/min
Gal/min
280
74
Marking   Hydraulic numbering (standard)
and/or milling (optional tool)
Vertical punches   7 punches and 13 dies
Horizontal punches   1
Drilling units   1 vertical (option)
Tool changer   1 x 5 
Drill holder   SK40

 

Vertical punch    
Punch capacity tonnes
tons
110 (metric)
120
Max. diameter vertical punch (510 N/mm2) mm
inch
Ø57 in 12 mm or Ø31 in 20 mm
Ø2-1/4 in 1/2 or Ø1-1/4 in 3/4
Max. diameter vertical punch (430 N/mm2) mm
inch
Ø57 in 14 mm or Ø31 in 25 mm
Ø2-1/4 in 1/2 or Ø1-1/4 in 1
Max. diameter vertical punch (360 N/mm2) mm
inch
Ø57 in 16 mm or Ø31 in 25 mm
Ø2-1/4 in 5/8 or Ø1-1/4 in 1
Slug container size L (dm3) 16
Minimum punch diameter - vertical mm
inch
5
13/64"

 

Horizontal punch    
Max. diameter horizontal punch (510 N/mm2) mm
inch
Ø31 in 16 mm 
Ø1-1/4 in 5/8
Max. diameter horizontal punch (430 N/mm2) mm
inch
Ø31 in 16 mm
Ø1-1/4 in 5/8
Max. diameter horizontal punch (360 N/mm2) mm
inch
Ø31 in 16 mm
Ø1-1/4 in 5/8
Punch capacity tonnes
tons
85 (metric)
93
Minimum punch diameter - horizontal mm
inch
5
13/64"

 

Drill unit (optional)    
Nominal drilling power Nm 200
Speed rpm 0 - 4.500 stepless
Drill diameter mm
inch
5 - 40 
12/64 - 1-9/16
Thread tapping inch M6 - M30
1/4 - 15/16
Axis speed Y and Z mm/s
ipm
500
1180

 

Shear    
Flat shear (45°) tonnes
tons
245 (metric)
270
Flat shear capacity 510 N/mm2 mm
inch
500 x 20
19-5/8 x 3/4
Flat shear capacity 430 N/mm2 mm
inch
500 x 25
19-5/8 x 1
Flat shear capacity 360 N/mm2 mm
inch
500 x 25
19-5/8 x 1
Angle shear tonnes
tons
245 (metric)
267
Angle shear capacity 510 N/mm2 mm 
inch
150 x 150 x 12
5-7/8 x 5-7/8 x 1/2
Angle shear capacity 430 N/mm2 mm
inch
160 x 160 x 14
6 x 6 x 1/2
Angle shear capacity 360 N/mm2 mm
inch
200 x 200 x 16
8 x 8 x 5/8

 

Hydraulic marking unit VN1/36 (standard)    
Marking numbers at once   1
Marking numbers on disk   36
Imprint depth mm 1
Imprint height mm
inch
10
3/8

 

Upfeed conveyor belt (Optional)    
Product size    ≤750 mm / 30 inch*
*Products larger are transported on the roller conveyor.

Remnants smaller than 350 mm are transported back to infeed and dropped in bin underneath infeed
conveyor. Remnants between 350 and 750 mm are dropped behind the shear.
Remnants larger than 750 mm are transported on the outfeed or infeed.
Sorting system outfeed (Optional)    
Number of sorting bins   13

Share this page:

Like & follow Voortman:

 
 
View our latest
magazine and
brochure
Contact Voortman