Voortman V200 | Plate drilling

Features | Specifications | Photos | Quotation

The V200 is specially designed for drilling, thread tapping, counter sinking and center point marking of plates. It consists of a rigid heavy steel C-frame, which ensures perfect stability during the drilling process. A servo driven drilling unit and a drilling table are mounted onto the frame. Two adjustable hydraulic clamps, which move along double linear guides, are installed for plate positioning. The drilling table is fitted with low friction rollers to ease the movement of the plate. A hydraulic clamp is used to keep the plate in place during the drilling process.

 
 

Features

Deburring unit

After drilling a hole, it can be deburred automatically, so there is no need for manual deburring afterwards.

Numbering unit

The numbering unit can be used to mark a product with a part number, so that it can be recognized in further production steps. The disc holds 16 characters, which are selected automatically.

Tool changer

An automatic tool changer with 8 tools is included with the machine. The tool changer ensures higher production as the machine does not have to wait for the operator to change the tool.

Repositioning   Heavy C-frame

In automatic mode, the V200 is able to drill plates up to a length of 2,4 m. After reaching the 1,4 m table limit, the product will be automatically repositioned so the last part can also be drilled.

 

The weight of our newly designed C-frame is almost 6.000 kg. This ensures the stability which is necessary for high speed drilling.

Double adjustable clamps   Tool length measuring by laser
 

To assure a good grip, the machine has 2 hydraulic clamps which can be adjusted sideways to have even better grip on larger plates. When the datum line is removed, the automatic repositioning mode can be used to drill longer material.

 

To be able to move the drilling unit to the material in full speed, the length of every new tool is measured by laser when a new tool is placed into the tool changer. This eliminates touch sensing.

Carbide drilling

Using synchronized servo drives with ball screws for each movement as well as a large 30 kW servo drive for the drilling spindle results in extreme acceleration. Maximum speed is reached in just a fraction of time, and maximum torque in the full range from 1 to 2.500 rpm is perfect for carbide drilling.

 

Specifications

    V200
Operating range mm
inch
1.400* x 1.000 x 60
55 x 40 x 2-3/8
Positioning weight kg
lbs
600
1,325
Drilling and positioning   Servo motors
Drilling units   1 vertical
Nominal power kW
Hp
30
40
Speed rpm 0 - 2.500 stepless
Tool changer   1 x 8
Drill holder   SK40
Drill diameter mm
inch
5 - 40
13/64- 1-9/16
Thread tapping
inch
M6 - M30
1/4- 15/16
Machine weight kg
lbs
6.000
13,250
*Longer lengths possible by automatic repositioning


 

Photos

 

Request a quotation

Machine*
Invalid input

Full name*
Invalid Input

Organization*
Invalid Input

Address*
Invalid Input

Postal Code
Invalid Input

City*
Invalid Input

State
Invalid Input

Country
Invalid Input

Phone number*
Invalid Input

E-mail address*
Invalid Input

Message
Invalid Input

Newsletter
Ongeldige invoer

Antispam*
AntispamInvalid Input

Share this page:

Like & follow Voortman:

 
 
View our latest
magazine and
brochure
Contact Voortman